Height adjustment of electric steering column adjustment jams in upper / lower adjustment position or it generates a cracking noise when exiting the upper /lower adjustment position (e.g. for Easy Entry function).

Height adjustment runs into upper / lower limit stop and jams there or generates a breakaway cracking noise when exiting the jammed limit stop.

1. Move fore/aft adjustment to the end position.

2. Release jamming of height adjustment by knocking with palm of hand onto top of steering wheel.

At the same time, push adjusting switch (downwards).

3. Commission driver's seat control unit.

While doing so,

- the control unit software is updated, if necessary

- the limit stops are cleared and normalized again

- and any renewed jamming is prevented

4. Once commissioning has been completed the vehicle can be handed over to the customer.

Note:

If a vehicle again suffers from the problem after the steps described above have been performed, report the case to BMBS Customer Service Technical Team via the TIPS Case Module.

Please attach a driver's seat control unit log to the case (event log in jammed state).